1. Asked: July 24, 2023In:

    Serial Port issue

    shiva Beginner

    Hi , Before printing declare it with the baud rate (Serial.begin(115200);)

    Hi ,

    Before printing declare it with the baud rate (Serial.begin(115200);)

    See less
    • 0
  2. Asked: August 3, 2023In:

    What emerging technology do you believe will have the most significant impact on embedded systems in the next five years?

    shiva Beginner

    Hi, I believe Ultra-Wide Band will be the future for next 10 years.

    Hi,

    I believe Ultra-Wide Band will be the future for next 10 years.

    See less
    • 0
  3. Asked: August 18, 2023In:

    UART communication

    shiva Beginner

    Hi, 1. Check whether your board supports Virtual COM Port (VCP) or else you need a external hardware like USB to TTL Converter for printing Messages. 2. What is the Application you are using to open the Serial Port (Putty, YAT, etc.)? Check that Hardware Flow Control is required or not? Thanks, ShivRead more

    Hi,

    1. Check whether your board supports Virtual COM Port (VCP) or else you need a external hardware like USB to TTL Converter for printing Messages.

    2. What is the Application you are using to open the Serial Port (Putty, YAT, etc.)? Check that Hardware Flow Control is required or not?

    Thanks,
    Shiva

    See less
    • 0
  4. Asked: August 19, 2023In:

    Which is the best institute in India to go for embedded systems & robotics?

    shiva Beginner

    Hi, CDAC is the best one for learning Embedded systems.

    Hi,

    CDAC is the best one for learning Embedded systems.

    See less
    • 0
  5. Asked: July 18, 2023In:

    FreeRTOS_config.h file for STM32F401RE Nucleo Board

    shiva Beginner

    Hi, Please check the path that is added. if not ,add them in the path. Thanks, shiva

    Hi, Please check the path that is added. if not ,add them in the path.
    Thanks,
    shiva

    See less
    • 0
  7. Asked: July 18, 2023In:

    USB Serial Port giving junk data

    shiva Beginner

    Please also check the baud rate (9600 , 115200, etc.,)

    Please also check the baud rate (9600 , 115200, etc.,)

    See less
    • 2
  8. Asked: July 18, 2023In:

    Selecting an Optimal Sensor for Waste Bin Level Measurement

    shiva Beginner

    Hi, I have used MB7389 HRXL-MaxSonar-WRMT for my project. I suggest you to go through the datasheet. Added the product link below: https://maxbotix.com/products/mb7389 Thanks, shiva

    Hi,

    I have used MB7389 HRXL-MaxSonar-WRMT for my project. I suggest you to go through the datasheet. Added the product link below:

    https://maxbotix.com/products/mb7389

    Thanks,
    shiva

    See less
    • 0
  9. Asked: July 17, 2023In:

    Error in final launch sequence

    shiva Beginner

    Hello, Disconnect and connect again to solve this issue. This type of error occurs when previous debugging was not successfully completed.

    Hello,
    Disconnect and connect again to solve this issue. This type of error occurs when previous debugging was not successfully completed.

    See less
    • 0