Suggest the roadmap to embedded software developer to a B.Sc..,Computer science
Embed Threads Latest Questions
akash03Beginner
Hi, the Arduino Uno will transmit CAN Extd frames over the CAN Bus every 1sec, and also Arduino Uno is also configured to Rx as well. On STM32F407VGT6 side, I have called, CAN_Init() (HAL), CAN_Start() and inside infinte loop. I’m ...
ZetaBeginner
Hello guys, I was just wondering that which is the best Institute in India to learn C/C++ programming, preferably offline, Youtube videos are good, but what if someone wants to learn this in depth, Would highly appreciate your advices/ suggestions.
Seeking advice on the best educational institute in India that offers high-quality programs in the field of embedded systems and robotics. Interested in finding a reputable institution with a strong curriculum, experienced faculty, and state-of-the-art facilities to pursue studies in ...
SaurabhBeginner
I am a fresher working on STM32F4 discovery board trying to print message on serial port with 9600 baud rate.However after building the the code successfully and running the code, message is not displaying on the com port.What could be ...
when slave address is placed in DR register then ADDR bit set but when control return from the address phase function the bit is cleared automatically . PS: this happens only in debug mode
JareshBeginner
I have a microcontroller and I have implemented bare-metal code on it like Arduino, stm32f030. Currently I’m on MSP430 and it’s flash is only 16kb. I also have a gsm module sim800l. With my bare-metal code, I can send and ...
Tanmoy Chandra DeyBeginner
I’m using nucleo-f446re for sending data by uart when i use uart2 it’s not working but when i use uart1 then it works can anyone tell me why it’s happening. I using PA2->Usart2_tx PA3->Usart2_rx While usart1 PA9->Usart1_tx PA10->Usart1_rx
BHASKARBeginner
Hello everyone, I am using stm32 for RTC where I have encountered with a problem i.e whenever I do the reset or power off the board the clock is working fine which means it is showing the exact time even ...
I hope I can get the answer from the scratch. Iam urging any documents also please provide in group or ping to my personal mail.tq in adv.