Welcome back to our IoT development journey, where we explore the fascinating world of the Internet of Things (IoT) using the Quectel EC200U Cellular Module, STM32 microcontrollers, and AWS IoT Core. In this chapter, we’re going to dive into the practical side of things and get hands-on with the EC200U module. We’ll guide you through the process of setting up the module, ensuring you have everything in place for effective IoT communication
The process will be demonstrated using a specific modem, the 7SEMI LTE 4G Mini Modem, and its associated driver installation. Let’s begin!
Board Specifications:
It’s worth noting that your specific board supports various frequency bands for LTE, including LTE-FDD (B1, B3, B5, B8) and LTE-TDD (B34, B38, B39, B40, B41). Additionally, it offers GSM support at 900MHz and 1800MHz. For positioning and location services, the board is equipped with GNSS capabilities, including GPS, GLONASS, BeiDou, Galileo, and QZSS.
Download the user manual and other tools.
Installing the EC200U-CN USB Modem Driver
The EC200U-CN USB Modem Driver is a critical component for the module’s operation. Follow these steps to install it:
- Download the Driver: Start by downloading the EC200U-CN USB Modem Driver.
- Connect the Modem: Plug your EC200U module into a USB port on your laptop or PC.
- Device Manager: Open the Device Manager. Your module should be detected and visible in the Device Manager.
- Update the Driver: Right-click on one of the “Mobile Generic Serial” entries and choose “Update Driver.”
- Browse for Drivers: Opt for the “Browse my computer for drivers” option.
- Locate Driver Folder: Now, locate the folder “EC200U_quectel_name” and click “Next.”
- Driver Installation: The Quectel USB MOS Port driver should install successfully.
- Repeat for Other Drivers: If there are other drivers to install, repeat the process, ensuring that all drivers are successfully installed.
With the drivers installed, you’re ready to proceed with the EC200U-CN module setup.
Hardware Connections and Considerations
The first step is to ensure you have the necessary hardware and connections in place.
- Power Supply: Make sure you provide a stable power supply to your EC200U module. This board can operate on 5V power either through a USB connection or a 5V serial connection. Verify that your power source is set to the appropriate voltage.
- Antenna Connection: Connect the appropriate antenna securely to the module’s antenna connector. This step is pivotal for efficient signal reception and transmission.
- SIM Card: Ensure a compatible SIM card is correctly inserted. This SIM card is necessary for cellular network access.
Module Communication Verification
Now that you’ve installed the necessary drivers and set up the hardware connections, it’s time to verify if the EC200U module is communicating correctly. This step is vital to ensure that the module can establish a connection with your computer and is ready for further interaction.
Using a USB Cable and Qnavigator Tool
- Connect with USB: Using a USB cable, connect your EC200U module to your computer.
- Open Qnavigator Tool: Launch the Qnavigator tool on your computer.
- Check Communication: After connecting, the Qnavigator tool should detect and recognize the EC200U module. This recognition indicates that your module is communicating correctly with your computer.
UART Communication Using USB-to-TTL
In addition to USB communication, it’s crucial to establish UART communication between the EC200U module and the USB-to-TTL module. This will allow you to send and receive AT commands and data between the two devices, an essential step for IoT development.
- USB-to-TTL Module: Connect the USB-to-TTL module to your computer using a USB cable. This module acts as a bridge between your computer and the EC200U module.
- UART Pins Connection: Properly connect the UART pins between the EC200U module and the USB-to-TTL module. The exact pinout configuration may vary depending on your hardware, so consult the module’s datasheet or documentation for the correct pin connections.
- Configuration: Set the UART parameters, such as baud rate, data bits, stop bits, and parity settings, to match the communication requirements of the EC200U module.
- Testing AT Commands: Once the UART communication is established, you can send AT commands from your computer to the module to check its responsiveness. AT commands are a standardized set of instructions used for controlling modems and other communication devices. By sending AT commands, you can test various functions of the module and verify its proper operation.
With successful communication verification through both USB and UART, you’re well-prepared for the next steps in your IoT development journey. In the upcoming chapter, we’ll delve into STM32 programming. We will explore how to send and receive AT commands between the STM32 board and the EC200U module. Stay tuned, as we take a deeper dive into IoT development and coding with STM32.
Stay connected, and let’s continue building incredible IoT solutions!
Fantastic blog you’ve got here.. It�s hard to come by quality writing similar yours presently. I truly appreciate folks similar you! Bear care!!
Also visit my web-site; http://www.Smokinstangs.com/member.php/281523-Serzoij
[…] new applications related to a Wildlife Disease Control Center being inbuilt Sichuan Province; and embedthreads.com proceed research on giant panda reproduction and post44069 management, as a result of, although […]
Hello very remarkable blog!! Chap .. Remarkable .. Extraordinary .. I will bookmark your site and take the feeds additionally�I am delighted to discover so numerous valuable information present in the post, we want expand more procedures on this regard, thank you for distribution.
My website :: http://wiseturtle.razornetwork.com/viewtopic.php?t=144906
I’m not positive where you’re acquiring your info, but fantastic issue. I requirements to expend some time scholarship more or comprehension more. Thank you for splendid knowledge I was appearance for this information for my task.
my website … http://Forum.D-dub.com/member.php?844357-Ilushiknja
Thank you for sharing your feelings. Kind regards!
Feel free to surf to my web page … http://Phpbb2.00WEB.Net/profile.php?mode=viewprofile&u=29708
You made some nice points there. I did a search on the matter and found most folks will consent with your website.
My web-site – http://forum.Antiq.in/member.php?u=38026
I’m not positive where you are acquiring your facts, but wonderful issue. I requirements to expend some time scholarship more or comprehension more. Thank you for splendid information I was appearance for this knowledge for my task.
My blog https://Sultantheme.com/vb4forum/member.php?9192-Vikigrm
That is actually engaging, You are a very skilled blogger. I have coupled your rss channel and look forward to searching for additional of your wonderful post. Additionally, I have shared your location in my social networks!
Here is my web-site … http://mail.Spearboard.com/member.php?u=822228
I blog quite often and I really thank you for your content material. This text has really peaked my interest. I’m going to bookmark your website and keep checking out for new details about once per week. I opted in for your RSS feed as well.
Look into my web page http://Adtgamer.Com.br/showthread.php?p=514326
Do you have a spam problem on this web site; I also am a blogger, and I was wanting to your situation; we’ve created some nice procedures and we are looking to trade methods with others, please shoot me an e-mail if interested.
My blog :: http://www.adtgamer.com.br/showthread.php?p=493401
Thanks, I have recently been looking for info about this subject for a long time and yours is that the best I have came upon so far. However, what concerning the bottom line? Are you sure concerning the source?
Feel free to surf to my web site – http://Cheapbooks.cc/memberlist.php?mode=viewprofile&u=36973
I’m not positive where you are acquiring your knowledge, but terrific issue. I requirements to expend some time scholarship additional or comprehension more. Thank you for splendid knowledge I was appearance for this knowledge for my task.
Feel free to surf to my blog post – http://Forum.mlotoolkit.com/viewtopic.php?t=2954
[…] есть жена и двое детей). Договоренность была такая: embedthreads.com эти расходы вычтут из первых двух зарплат Павла. […]
That is actually fascinating, You’re an extremely skilled blogger. I have coupled your rss channel and foresee in quest of additional of your wonderful post. Also, I’ve shared your web site in my social networks!
Also visit my website – http://atego-club.ru/forum/member.php/73502-Leonafz
fantastic putting as an entire, you simply won a emblem new reader. What would you suggest about your that you simply made a few days ago? certain?
my blog – http://Forum.d-Dub.com/member.php?847379-Davidwit
An interesting discussion is worth comment. I think that you should write read more on this particular topic, it might not be a taboo subject but usually people don’t discuss these. To the next! Cheers!!
Check out my web site – http://Forums.Outdoorreview.com/member.php?294473-Davidthd
Astounding! This blog gazes just similar my old one! It’s on a entirely at variance matter but it has beautiful much the same template and blueprint. Excellent preference of colours!
my page; http://Www.Dendymaster.ru/forum/showthread.php?p=39869
You made some nice points there. I looked on the issue and found most of people will consent with your weblog.
my webpage – http://Spearboard.com/member.php?u=812269
Do you have a spam issue on this site; I also am a blogger, and I was wanting to your situation; we have developed some nice procedures and we are looking to swap methods with other folks, be sure to shoot me an e-mail if interested.
Here is my web site; http://Adtgamer.Com.br/showthread.php?p=496195
fantastic putting as an entire, you simply won a new reader. What could you suggest post that you simply made a few days in the past? Any sure
my web-site :: http://www.adtgamer.com.br/showthread.php?p=496896
Thank you for the goood writeup. It in fact
was a amusement account it. Look advanced to more added agreeable from you!
However, how can we communicate?
Feel free to visit my webpage: http://bbs.long-D.cn/users/282201/
Just want to say your article is as amazing. The clearness in your post
is juyst excellent and i can assume you are an expert on this
subject. Fiine with yor permission allow me to grab your
RSS feed to keep up to date with forthcoming post.
Thanks a million and please continue the enjoyable work.
my webpage :: Mona
Howdy, i read your blog occasionally and i
own a similar one and i was just wondering if you get a lot of spam remarks?
If so how do yoou prevent it, any plugin or anything
you can suggest? I get so much lately it’s driving me craszy so
any assistance is very much appreciated.
Also visit myy web page – post489542
Thank you for thee good writeup. It in fact was a amusement account it.
Look advanced to more added agreeable from you!
However, how can we communicate?
Feel free to surf to my blog: http://Himeuta.org/member.php?1530387-Svetlanafhv
Excellent article. I am experiencing some of these issues as well..
Here is my page … http://Gamecenter.Idknet.com/forum/member.php?u=218378